News
Our products are widely used in automobile manufacturing, machinery manufacturing, fitness equipment, medical equipment, household daily use and other fields
Why can't the gas spring be pressed down?
Classification: Technical Article
Release Time:2022-08-28 21:15
Gas springs are widely used in daily production and life. Gas springs of different materials have different applications. From the material, we can divide them into ordinary gas springs and stainless steel gas springs. Ordinary gas springs are more common, such as air pressure beds, swivel chairs, etc. , Stainless steel gas springs are used in relatively special industries, such as food machinery, medical equipment, military industry, or industries with high temperature characteristics. But some people find that the gas spring cannot be pressed down during the process of using the gas spring. Why is this? how should I solve this?
First of all, we need to understand what is the reason why the gas spring cannot be pressed down?
First: the hydraulic rod itself may be damaged, and the machine itself is faulty, so the gas spring cannot be pressed down. This situation mostly occurs when the gas spring is used for a period of time, the gas spring control is unstable, and the pressing fails.
Second: the angle of the gas spring hydraulic rod is wrong, and the gas spring is also realized according to the principle of lever. If the power arm of the gas spring is too short so that the power of the power arm is not fully exerted, the gas spring will not be able to be pressed down at this time. .
Third: the force of the hydraulic rod acting on the gas spring is too small. Generally, there is a corresponding pressure inside the gas spring according to the design. If the person's strength is not enough, the gas spring will not be able to be pressed down. Generally, the internal pressure exceeds 25kg, and it is difficult for the human hand to press down.
After we understand the reason why the gas spring cannot be pressed down, we can take appropriate measures to solve the problem according to the specific cause.
When the gas spring hydraulic rod has been damaged, it is recommended not to use the damaged gas spring, but to replace it with a new one. The possibility of repairing the damaged gas spring is very small, and the re-use efficiency is very low and difficult to control, so Replacing the gas spring is a better way.
Improper use of the hydraulic angle of the gas spring makes it impossible to press down. I can properly adjust the hydraulic angle of the gas spring, extend the power arm, and make full use of the lever principle to compress the gas spring. Because the pressure of more than 25kg basically makes it difficult for the gas spring to be pressed down by hand, so in this case, it needs to be installed on the component and the lever principle can be used to press down. Another point we need to pay attention to is that we must pay attention to safety when replacing the gas spring or operating the down-pressure gas spring. Although the gas spring is relatively controllable, the gas spring contains high-pressure gas. If the operation is improper, it will be a safety hazard. of.
In the process of installing and using the gas spring, it is necessary to understand the problems that the gas spring needs to pay attention to, pay attention to the maintenance of the gas spring, do not let the gas spring corrode, pay attention to the maintenance of the gas spring, and replace it in time if there is a problem, so as to avoid potential safety hazards. When we choose a gas spring, we should not only consider the price of the gas spring, but also the quality of the gas spring, and comprehensively select the appropriate gas spring.
QITIAN
Address: Building 5, No. 278, Linsheng Road, Jinshan District, Shanghai
Service Hotline
Fax：+86-021-6220 6811
Wechat Code